Xerox wc7530 用户指南

Printing 

 

60 

WorkCentre 7500 Series Multifunction Printer 

 User 

Guide 

 

Windows Printing Options 

When you print from any software application, the printer uses the print job settings specified in the 
Printing Preferences window. You can specify your most common printing options and save them so that 

you do not have to change them every time you print. 

For example, if you want to print on both sides of the paper for most jobs, specify 2-sided printing in 
Printing Preferences. 

To select default printing options: 
1.  In the Windows Taskbar, click Start > Settings > Printers and Faxes. 
2.  In the Printers and Faxes folder, right-click the icon for your printer and click Printing Preferences. 
3.  Click a tab in the Printing Preferences window, select options, then click OK to save. 

 

Note: 

For more information about Windows print driver options, click the Help button (?) in the 

Printing Preferences window. 

 

 

To use special printing options for a particular job, change the Printing Preferences from the application 
before sending the job to the printer. For example, if you want to use the Enhanced print-quality mode 

when printing a particular document, select Enhanced in Printing Preferences before printing the job. 
1.  With the document open in your software application, access the print settings. For most software 

applications, click File > Print or press CTRL+P for Windows. 

2.  Select your printer and click the Properties or Preferences button to open the Printing Preferences 

window. The title of the button can vary depending on your application. 

3.  Click a tab in the Printing Preferences window, then make selections. 
4.  Click OK to save and close the Printing Preferences window. 
5.  Click Print to send the job to the printer. 

 

 

If your printer has a finisher installed, select finishing options in the Printing Preferences of the print 

driver. In addition to stapling, the Office Finisher LX and the Professional Finisher provide hole punching. 
The Professional Finisher also provides collation, folding, and stapling. 

To select finishing options in the PostScript and PCL print drivers: 
1.  In the print driver, click the Paper/Output tab. 
2.  Click the arrow to the right of the Finishing section, then select the desired finishing options. 

 

 

You can define and save a set of options, so that you can apply them to future print jobs.