Xerox pe16 用户手册

P

APER

 H

ANDLING

3.3

When selecting or loading paper, envelopes, or other special 
materials, keep these guidelines in mind:

• Attempting to print on damp, curled, wrinkled, or torn paper 

can cause paper jams and the poor print quality.

• Use only high quality copier grade paper. Avoid paper with 

embossed lettering, perforations, or texture that is too 
smooth or too rough. Paper jams may occur.

• Store paper in its ream wrapper until ready to use. Place 

cartons on pallets or shelves, not on the floor. Do not place 
heavy objects on top of the paper, whether it is packaged or 
unpackaged. Keep it away from moisture, or other conditions 
that can cause it to wrinkle or curl.

• During storage, you should use moisture-proof wrap, such as 

any plastic container or bag, to prevent dust and moisture 
from contaminating your paper.

• Always use paper and other materials that conform with the 

• Use only well-constructed envelopes with sharp, well creased 

folds.
- DO NOT use envelopes with clasps and snaps.
- DO NOT use envelopes with windows, coated lining, 
 self-adhesive seals, or other synthetic materials.
- DO NOT use damaged or poorly made envelopes.

• Load special paper types one sheet at a time.

• Only use materials specifically recommended for use in laser 

printers.

• To prevent special materials, such as transparencies and label 

sheets from sticking together, remove them as they prints 
out.

• Place transparencies on a flat surface after removing them 

from the machine.

• Do not leave transparencies in the paper tray for long periods 

of time. Dust and dirt may accumulate on them resulting in 
spotty printing.

• To avoid smudging caused by fingerprints, handle 

transparencies and coated paper carefully.

• To avoid fading, do not expose the printed transparencies to 

prolonged sunlight.

• Store unused materials at temperatures between 15 

o

C and 

30 

o

C (59 

o

F to 86 

o

F). The relative humidity should be 

between 10 % and 70 %.

• Verify that your labels’ adhesive material can tolerate fusing 

temperature of 200 

o

C (392

o 

F) for 0.1 second.