Xerox pe16 用户手册

P

APER

 H

ANDLING

3.8

 

• If you experience problems with paper feed, place the paper in 

the Bypass tray.

• You can load up to 150 sheets of 

previously printed paper. The printed 
side should be facing up with an 
uncurled edge at the top side. If you 
experience problems with paper 
feed, turn the paper around. Note 
that the print quality is not 
guaranteed.

Use the Bypass tray to print transparencies, labels, envelopes or 
postcards in addition to making quick runs of paper types or 
sizes that are not currently loaded in the paper tray.

Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized 
materials can be printed with this printer. The minimum size is 
76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by 
356mm(8.5 by 14 in.)

Acceptable print materials are plain paper with sizes ranging 
from 100 x 148 mm (3.9 x 5.8 in.) to Legal, 216 x 356 mm 
(8.5 x 14 in.), the largest size acceptable, and weighing between 
16 lb and 32 lb.

 

• Always load only the print materials specified in the 

Specifications on page A.6 to avoid paper jams and print quality 
problems.

• Flatten any curl on postcards, envelopes and labels before 

loading them into the Bypass tray.

• When you print on 76mm X 127mm (3 X 5 in.) sized media with 

loading into the tray, open the rear output tray.

Load a sheet of the print material with the print side face 
up and into the center of the tray.