Xerox pe16 用户手册

C

OPYING

4.11

You can copy a 2-sided document on one page of A4, Letter or 
Legal-sized paper. 

When you copy using this feature, the machine prints one side 
on the upper half of the paper and the other side on the lower 
half without reducing the original. This feature is helpful for 
copying a small-sized document, such as a name card. 

If the original document is larger than the printable area, some 
portions may not be printed.

This special copy mode can be applied when you load document 
only using the document glass. If a document is detected in the 
ADF, the 2-side copying feature does not work.

Load the document to be copied on the document glass, 
and close the cover. 

Press Special. 

Press Special or the scroll button (

¦

 or 

‹

) until “2-Side” 

displays on the bottom line.

Press Enter to save the selection.

If necessary, customise the copy settings including number 
of copies, copy size, contrast and image type by using the 
control panel buttons. See “Setting Copy Options” on 
page 4.6.

Press Start Copy/Fax to begin copying.

Your machine begins scanning the front side.

When “Set Backside” displays on the bottom line, open the 
document cover and flip the document over. Close the 
cover.

 If you press the Stop button or if no buttons are pressed 

for about 30 seconds, the machine cancels the copy job and 
returns to Standby Mode.

Press Start Copy/Fax again.

 You cannot adjust the copy size using the Reduce/

Enlarge button for making a 2-side Copying.