Xerox XK25C 用户指南
Getting Started
9
5
Attach a printer cable.
n
USB cable (only for Windows 98 PCs): Plug one end into the USB
port on the back of the WorkCentre, and the other USB cable end
into the USB port on your PC.
port on the back of the WorkCentre, and the other USB cable end
into the USB port on your PC.
Or
n
Parallel cable (not supplied, use IEEE 1284 cable for bi-directional
communications): Plug one end of the parallel cable into the
matching parallel port on the back of the WorkCentre, and plug the
other end of the parallel cable into the matching parallel port on your
PC. Swing the two wire clips on the sides of the WorkCentre parallel
port inward until they lock firmly inside the notches on the parallel
cable connector. Refer to your computer documentation for
assistance with this parallel cable procedure.
communications): Plug one end of the parallel cable into the
matching parallel port on the back of the WorkCentre, and plug the
other end of the parallel cable into the matching parallel port on your
PC. Swing the two wire clips on the sides of the WorkCentre parallel
port inward until they lock firmly inside the notches on the parallel
cable connector. Refer to your computer documentation for
assistance with this parallel cable procedure.
CAUTION: Use only one cable – USB or parallel cable. If your PC
does not have both a USB port and Windows 98, you must use a
parallel cable.
does not have both a USB port and Windows 98, you must use a
parallel cable.
Wire clip
Parallel port
USB port
6
Plug one end of the supplied AC power cord into the power socket on
the back of the machine. Plug the other end into a standard AC power
outlet.
the back of the machine. Plug the other end into a standard AC power
outlet.
AC power cord socket
Ä