Xerox XK25C 用户指南
Preface
vi
Safety Notes
(continued)
This product is equipped with a grounding type plug. The plug will fit only
into a grounded power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the receptacle if you are
unable to insert the plug into the outlet. Never use an adapter to connect the
WorkCentre to a power source receptacle that lacks a ground connection
terminal.
into a grounded power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the receptacle if you are
unable to insert the plug into the outlet. Never use an adapter to connect the
WorkCentre to a power source receptacle that lacks a ground connection
terminal.
The WorkCentre should be operated from the type of power source indicated
on the label. If you are not sure of the type of power available, consult your
local power company.
on the label. If you are not sure of the type of power available, consult your
local power company.
Do not allow anything to rest on the power cord. Do not locate the
WorkCentre where people will step on the cord.
WorkCentre where people will step on the cord.
The power supply cord is the disconnect device for this equipment. The
On/Off power switch does not electrically disconnect the machine from its
power source. You must unplug the power supply cord to electrically
disconnect the WorkCentre. Ensure that the WorkCentre is installed near an
outlet and is easily accessible.
On/Off power switch does not electrically disconnect the machine from its
power source. You must unplug the power supply cord to electrically
disconnect the WorkCentre. Ensure that the WorkCentre is installed near an
outlet and is easily accessible.
Your machine is equipped with an energy saving device to conserve power
when the machine is not in use. The machine may be left on continuously.
when the machine is not in use. The machine may be left on continuously.
Slots and openings in the cabinet and in the back and sides of the
WorkCentre are provided for ventilation. To ensure reliable operation of the
WorkCentre and to protect it from overheating, these openings must not be
blocked or covered. The WorkCentre should never be located near or over a
radiator or heat register. The WorkCentre should not be placed in a built-in
installation unless proper ventilation is provided.
WorkCentre are provided for ventilation. To ensure reliable operation of the
WorkCentre and to protect it from overheating, these openings must not be
blocked or covered. The WorkCentre should never be located near or over a
radiator or heat register. The WorkCentre should not be placed in a built-in
installation unless proper ventilation is provided.
Never push objects of any kind into the slots of the WorkCentre as they
may touch dangerous voltage points or short out parts which could result in a
fire or electric shock.
may touch dangerous voltage points or short out parts which could result in a
fire or electric shock.
Never spill liquid of any kind on the WorkCentre.
Never remove covers or guards that require a tool for removal. There are
no casual operator serviceable areas within the covers of the WorkCentre.
no casual operator serviceable areas within the covers of the WorkCentre.