Xerox pro 16p 用户指南

Keeping the document glass clean helps ensure the best possible copies.  Xerox suggests that
you clean the document glass at the start of each day and during the day as needed.
CAUTION:  Do not pour or spray water directly onto any part of the copier.

1.  Slightly dampen a soft lint-free cloth or paper towel with

water.

2.  Wipe the surface of the document glass and the narrow

glass adjacent to the document glass until it is clean and
dry.

3.  Wipe the underside of the white document cover until it

is clean and dry.

4.  Close the document cover.

If copies start getting streaks or blotches, the corotron wire may be dirty.

Note:  Ensure that the alternate paper tray is lowered.

1.  Press the release latch to open the side cover.

2.  Remove the green corotron wire cleaner from inside the

copier (near the front corner of the machine).

3.  Insert the corotron cleaner into the corotron wire unit.

4.  Wipe the corotron wire with the corotron cleaning tool as

shown.

5.  Replace the cleaner and close the side cover.