Xerox pro 16p 用户指南
50
Problem Solving
Status Code Chart
Status Code
Suggested Solution
Ensure that there is paper in the selected paper tray. Ensure that the
Paper Tray is closed properly.
Paper Tray is closed properly.
Paper may not have fed all the way into the Pro 16p. (Refer to
Loading Paper and Flashing
Loading Paper and Flashing
P
.)
E2
Copy paper has misfed. (Refer to Clearing the Paper Path.)
J1
The toner indicator on the copier diagram will light when the toner
supply is low. Approximately 10 more copies can be made, but you
should have a replacement cartridge in stock. When the J1 status
code is displayed, the machine will stop operating until the toner
cartridge is replaced.
supply is low. Approximately 10 more copies can be made, but you
should have a replacement cartridge in stock. When the J1 status
code is displayed, the machine will stop operating until the toner
cartridge is replaced.
J2
The drum cartridge indicator on the machine diagram lights when the
drum is near the end of life. Approximately 1,000 more copies can be
made, but you should have a replacement cartridge in stock. When
the J2 status code is displayed, the machine will stop operating until
the drum cartridge is replaced.
drum is near the end of life. Approximately 1,000 more copies can be
made, but you should have a replacement cartridge in stock. When
the J2 status code is displayed, the machine will stop operating until
the drum cartridge is replaced.
J3
The toner cartridge is invalid. Install a valid toner cartridge.
C1
The front or side cover is open. Close the cover.
CH
Install the toner cartridge.
A1 – A2
Remove misfed paper from the Single Pa
ss
Feeder. Refer to
A1 – A2
Automatic Document Feeder Misfeed for detailed instructions.
L1
Ensure that the shipping screw is removed.
E7
F9
H2 – H4
L3 – L5
U2 – U5
Switch OFF the Main Power. Wait approximately 5 seconds. Switch
ON the Main Power. If the status code continues, call for service.
ON the Main Power. If the status code continues, call for service.