Xerox pro 16fx 用户指南

To allow multiple fax machines to poll your fax, or in cases where you want to free up the
Document Tray for other operations, use Memory Polling instead of Polling Standby.

You can choose whether to allow polling only once, or an unlimited number of times.  In the later
case, your fax machine can be used as an electronic “bulletin board”.

•

 

Only one document can be stored at a time for memory polling.  However, you can store
multiple page documents.

•

 

If you allow polling only one time (1 TIME), the document will be automatically cleared from
memory after polling.  If you allow polling to repeat an unlimited number of times (REPEAT),
the document will remain in memory until you clear it using the procedure described in the
Clearing Documents section which follows.

•

 

If you have a document stored in memory for polling, and you want to add to it, follow the
procedure described in the Adding to Documents section.

To program a Memory Polling operation, either load the document in the SPF or use the
document glass as described below.  Then set the reception mode to AUTO (Press the
Reception key until the AUTO light comes on).

then 9

Display = “MEMORY POLL MODE” (first line)
Display = “1: 1 TIME  2: REPEAT” (second line)

Display = “SET RESOLUTION & CONTRAST THEN
ENTER”

Resolution
or
Contrast

Adjust the resolution and/or contrast settings if
desired.

•

 

If the document has already been set in the SPF,
then it will scan automatically.

•

 

If the document has not yet been set in the SPF,
then place the document in the SPF and press the
Start Fax key.

or
If faxing from the document glass:

•

 

Place the document on the document glass and
press the Fax From Glass key and follow the
instructions on the LCD.

twice