Xerox pro 16fx 用户指南

Ensure that there is paper in the selected paper tray. Ensure that the Paper
Tray is closed properly.

Paper may not have fed all the way into the Pro 16fx.  (Refer to Loading
Paper and Flashing 

.)

E2

Copy paper has misfed.  (Refer to Clearing the Paper Path.)

J1

The toner indicator on the copier diagram will light when the toner supply is
low.  Approximately 10 more copies can be made, but you should have a
replacement cartridge in stock.  When the J1 status code is displayed, the
machine will stop operating until the toner cartridge is replaced.

J2

The drum cartridge indicator on the machine diagram lights when the drum
is near the end of life.  Approximately 1,000 more copies can be made, but
you should have a replacement cartridge in stock.  When the J2 status
code is displayed, the machine will stop operating until the drum cartridge
is replaced.

J3

The toner cartridge is invalid.  Install a valid toner cartridge.

C1

The front or side cover is open.  Close the cover.

CH

Install the toner cartridge.

A1 – A2

Remove misfed paper from the Single Pass Feeder.  Refer to A1 – A2
Single Pass Feeder Misfeed for detailed instructions.

L1

Ensure that the shipping screw is removed.

E7

F6

H2 – H4

L3 – L5

U2 – U5

Switch OFF the Main Power.  Wait approximately 5 seconds.  Switch ON
the Main Power.  If the status code continues, call for service.