Xerox pro 16fx 用户指南
18
Copying
Alternate Paper Tray
The alternate paper tray can be used to feed multiple sheets of standard paper, or it can be used
to feed single sheets of special or heavy papers such as note cards, transparencies, and labels.
to feed single sheets of special or heavy papers such as note cards, transparencies, and labels.
The alternate paper tray holds up to 50 sheets of 20 lb/ 80 gsm paper ranging in size from
3.5
3.5
×
5.5" to 8.5
×
14"/ A6 to 216
×
356mm.
Load special stock as follows:
Predrilled paper: holes toward the rear of the copier.
Letterhead paper: face down with the top toward the left.
Envelopes: flap side up and toward the rear, one at a time.
Labels: face down, one at a time.
Transparencies: removable stripe face up and toward the rear, one at a time.
Transparencies: removable stripe face up and toward the rear, one at a time.
•
Use labels, transparencies, and envelopes specifically designed for copiers (high
temperatures).
temperatures).
1. Place the original face down and align it with the
registration guide on the document glass.
2. Lower the alternate paper tray, located on the right side
of the copier.
3. Unfold the paper support extension as shown.
4. Adjust the guides to the width of the copy paper.
5. Insert the copy paper all the way into the alternate paper
tray until it stops (do not force).
•
50 sheets max.
Note: When loading envelopes, labels, or transparencies
insert one at a time.
insert one at a time.
6. Press the Paper Supply button to select the alternate
paper tray.
7. Select other required features.
8. Press the Start button.