Xerox pro 16fx 用户指南
22
Copying
Feature
Program
Number
Option Number
* Factory Setting
Default Image Quality: This feature allows
you to select the default Image Quality mode.
you to select the default Image Quality mode.
5
0 – Auto Exposure *
1 – Text
2 – Photo
1 – Text
2 – Photo
Auto Contrast Adjustment: The copy
contrast range may be adjusted when the
copy image is consistently too light or too dark
in the Auto Image Quality mode.
contrast range may be adjusted when the
copy image is consistently too light or too dark
in the Auto Image Quality mode.
6
0 – Lightest
1 – Lighter
2 – Normal *
3 – Darker
4 – Darkest
1 – Lighter
2 – Normal *
3 – Darker
4 – Darkest
Paper Trail Edge Deletion: The trail edge
deletion can be turned Off to accommodate
originals that have print to the very bottom
edge. When Off, another 4 mm will copy,
however the image quality may deteriorate as
it gets closer to the bottom edge.
When this feature is On each time the paper
tray is opened edge deletion is disabled for the
first copy. Edge deletion is enabled for the
following copies.
deletion can be turned Off to accommodate
originals that have print to the very bottom
edge. When Off, another 4 mm will copy,
however the image quality may deteriorate as
it gets closer to the bottom edge.
When this feature is On each time the paper
tray is opened edge deletion is disabled for the
first copy. Edge deletion is enabled for the
following copies.
7
0 – On *
1 – Off
1 – Off
Reduction/Enlargement Preset: This
feature allows you to set a specific preset
reduction or enlargement setting for the
key.
feature allows you to set a specific preset
reduction or enlargement setting for the
key.
10
50 – 200%
Default 50% *
Default 50% *
Auto Paper Tray Switching: When enabled,
the copier will automatically switch to another
paper tray when the selected tray runs out of
paper.
the copier will automatically switch to another
paper tray when the selected tray runs out of
paper.
11
0 – On
1 – Off *
1 – Off *
Single Pass Feeder Contrast
Adjustment/Automatic Document Feeder:
The copy exposure range may be adjusted
when the copy image is consistently too light
or too dark.
Adjustment/Automatic Document Feeder:
The copy exposure range may be adjusted
when the copy image is consistently too light
or too dark.
12
0 – lightest
1 – lighter
2 – Normal *
3 – darker
4 – darkest
1 – lighter
2 – Normal *
3 – darker
4 – darkest
Return to Print Mode: This feature allows
you to select the time it takes for the copier to
return to the print mode after a copy job is
complete.
you to select the time it takes for the copier to
return to the print mode after a copy job is
complete.
14
0 – 60 seconds *
1 – 90 seconds
2 – 120 seconds
3 – 150 seconds
4 – 180 seconds
5 – Off - no time out
1 – 90 seconds
2 – 120 seconds
3 – 150 seconds
4 – 180 seconds
5 – Off - no time out