Xerox xi70c 用户指南
26
Software Installation
(continued)
DOS environment
Although optimized for operation in a Windows
environment, your printer
will also operate in DOS, recognizing PCL III + command codes. This
means that you can print from any DOS application that supports this
command code set.
means that you can print from any DOS application that supports this
command code set.
The installation CD supplied with your printer also contains a printer set-
up utility program (CONFIG.EXE), which allows you to personalize the
printer settings, if your application driver does not already contain the
settings you require.
up utility program (CONFIG.EXE), which allows you to personalize the
printer settings, if your application driver does not already contain the
settings you require.
The programmable features available through CONFIG.EXE are the
following:
following:
Parameter
(Identifier)
(Identifier)
Value(s) (Qualifier)
PaperFormat
A4, A5, US Letter, US Legal, US Executive,
COM-10, DL, C6, C5, B6
User-defined: min. 4 x 5.8 in; max. 8.5 x 14 in
COM-10, DL, C6, C5, B6
User-defined: min. 4 x 5.8 in; max. 8.5 x 14 in
PerSkip
Off (no bottom margin - BOF)
On (BOF = 12.7 mm)
On (BOF = 12.7 mm)
TextScale
Off
On
On
Bimdensity
75, 150, 300 (dots per inch)
Terminator
Normal (CR=CR;LF=LF;FF=FF)
AutoLF (CR=CR+LF;LF=LF;FF=FF)
AutoCR (CR=CR+LF;LF=LF;FF=CR+FF)
AutoCRLF (CR=CR+LF;LF=LF+CR; FF=CR+FF)
AutoLF (CR=CR+LF;LF=LF;FF=FF)
AutoCR (CR=CR+LF;LF=LF;FF=CR+FF)
AutoCRLF (CR=CR+LF;LF=LF+CR; FF=CR+FF)
Quality
LQ (Letter Quality)
NLQ (Near Letter Quality)
DRAFT (Draft)
NLQ (Near Letter Quality)
DRAFT (Draft)
WidthType
Off (nominal character size)
HalfWidth
HalfHeight
HalfWidth
HalfWidthHeight
HalfWidth
HalfHeight
HalfWidth
HalfWidthHeight
TypeStyle
1 (Courier Upright Port. 10cpi 12pt))