Gestetner c7006dw 操作指南

Troubleshooting

38

❒ If the error message that is not included in the following table appears on the

panel display, turn the printer off and on. If this does not clear the error mes-
sage, write down the error number and the message, and contact your sales
or service representative.

❒ The panel display can show only one error message at a time. Printing a con-

figuration page shows all current printer errors. 

❒ For more information about the IPDL-C printer driver, see the printer driver's

Help.

❒ For more information about the RICOH-SCRIPT2 printer driver, see the “Op-

erating Instructions” for RICOH-SCRIPT2 included as a PDF file on the CD-
ROM.

Add Fuser Oil

(on the upper line)

The fuser oil bottle is emp-
ty.

Replace the fuser oil bottle. 

Add Fuser Oil

(on the lower line)

Fuser oil is low. You can 
print about 200 or /more 
pages after this message 
appears.

Replace the fuser oil bottle. 

Add Toner

Please Wait

The toner cartridge is being 
prepared for replacement.

Wait for a while.

Add Toner

xxx

The indicated toner runs 
out.

Replace the indicated toner 
cartridge.

Call Service

SC:xx

There is a malfunction in 
the printer.

Turn the printer off and on.

If this does not clear the 
problem, contact your sales 
or service representative.

Change Fuser

It is time to replace the fus-
ing unit.

Contact your sales or ser-
vice representative.

Change PCU.

It is time to replace the pho-
toconductor unit.

If prints are dirty, replace 
the photoconductor unit.