Gestetner c7006dw 操作指南

Other Printing Problems

55

It takes too much time to per-
form black and white print-
ing.

 is selected on the printer driver. Change the col-

or mode setting to 

. 

❒ Some applications ignore the color mode setting 

made with the printer driver.

The desired tray is not used 
for the output.

The printer driver setting is not correct. Change the set-
ting.

The desired paper size is not 
used for the output.

The printer driver setting is not correct. Change the set-
ting.

Check the paper size settings. The size specified with 
the paper size dial might be different from the actual 
paper size. Make the correct dial setting. 

Specified paper is not loaded correctly in the paper 
tray. Remove the paper from the tray and reload the 
specified paper correctly. 

❒ If you select "Bypass Tray" with the IPDL-C printer 

driver, you must select the paper size from both the 
printer driver and the operation panel.

❒ If you select “Bypass Tray” with the RICOH-

SCRIPT2 printer driver, you can set the paper size 
on the operation panel.

The print side of the page is a 
hazy gray. 

The charger and dust-proofing glass are dirty. Clean 
them. 

 P.65 “Cleaning the Charger” and P.66 “Cleaning 

Adjust the image density setting. Extreme settings may 
create output that appears dirty. 

If the message "Change PCU" appears on the panel dis-
play, replace the photoconductor unit.