Gestetner c7528 补充手册

Troubleshooting

100

Hardware Problem

HDD

The printer identified a HDD 
Board error.

Turn the power off, and then on. Re-
move and re-install the HDD board 
correctly. If the message appears 
again, contact your sales or service 
representative.

See “Attaching Printer Hard Disk Type 
7100”, Setup Guide.

Hardware Problem

IEEE1394

The printer identified an IEEE 
1394 interface board error.

Turn the power off, and then on.

Remove and re-install the IEEE 1394 
interface board correctly.

A

Check the IEEE 1394 interface 
board is correctly attached to the 
computer.

B

Check the IEEE 1394 interface ca-
ble is securely connected.

C

Unplug the IEEE 1394 interface 
cable which is connected to the 
printer.

D

Restart the computer. If the mes-
sage appears even after executing 
above operation, proceed to the 
following steps.

E

Execute the utility tool for IEEE 
1394 interface board that is stored 
in the following path in the CD-
ROM labeled “Printer Drivers and 
Utilities”: UTILITY\1394

❒ For details about using the utility 

tool for IEEE 1394, see the RE-
ADME file in the same directory in 
the CD-ROM. If the message ap-
pears again, contact your sales or 
service representative.

See “Attaching IEEE 1394 Interface 
Board Type B”, Setup Guide.

Hardware Problem

Option RAM

The printer identified an option-
al RAM error.

Turn the power off, and then on. Re-
move and re-install the optional RAM. 
If the message appears again, contact 
your sales or service representative.

See “Attaching Memory Unit Type C 
(SDRAM Module)”, Setup Guide.

Messages

/ Second messages

Description

Solution