Gestetner c7528 补充手册
Troubleshooting
106
Reset Fusing
Unit correctly
There is no fusing unit, or the
fusing unit is not installed cor-
rectly.
fusing unit is not installed cor-
rectly.
Set the fusing unit correctly.
See
Reset PCU
correctly
XXX/XXX
The indicated photoconductor
unit(s) is/are not set correctly,
or not set.
unit(s) is/are not set correctly,
or not set.
XXX: Yellow/Magenta/Cy-
an/Black
an/Black
Set the indicated photoconductor
unit(s) correctly.
unit(s) correctly.
See
.
Reset the Job
or Form Feed
/ Paper Size:
Paper Type:
The paper size and type setting
in the tray differs from that of
actual paper size and type in
the tray.
in the tray differs from that of
actual paper size and type in
the tray.
Load paper of the selected size in the
tray, and then change the paper size
setting with the control panel. Or,
press {Form Feed}, and then select the
tray using the control panel. Or, press
{Job Reset} to cancel the print job.
tray, and then change the paper size
setting with the control panel. Or,
press {Form Feed}, and then select the
tray using the control panel. Or, press
{Job Reset} to cancel the print job.
Reset Tray #
or Form Feed
The indicated paper input tray
is not set correctly, or not set.
is not set correctly, or not set.
#: tray number
Set the indicated paper input tray cor-
rectly.
rectly.
Reset Waste
Toner correctly
The waste toner bottle is not set
correctly, or not set.
correctly, or not set.
Set the waste toner bottle correctly.
Resetting Job...
Job is being reset.
Wait a while.
ROM Update
Waiting for Data
The printer is waiting for updat-
ed data.
ed data.
Don't turn off the printer while it is wait-
ing for data.
ing for data.
ROM Update
Receiving Data
The printer is receiving updated
data.
data.
Don't turn off the printer while it is re-
ceiving data.
ceiving data.
SC XXX-X
Power Off On
If Error Reoccur
Call Service
Turn the power off and then on.
If the message appears again,
contact your sales or service
representative.
If the message appears again,
contact your sales or service
representative.
Turn the power off, and then on. If the
message appears again, contact your
sales or service representative.
message appears again, contact your
sales or service representative.
SD authenticatn.
failed
Authentication for the SD card
has failed.
has failed.
Turn the power switch off and then
back on again. If the message ap-
pears again, contact your sales or ser-
vice representative.
back on again. If the message ap-
pears again, contact your sales or ser-
vice representative.
Setting change in
process
process
The settings are being
changed.
changed.
Wait a while.
SSID not entered
This message appears if the
SSID has not been entered.
SSID has not been entered.
Enter the SSID.
Supply order
failed
Supply order has failed.
The use is required to reset the job.
Toner is almost
empty: Black
The printer is almost out of ton-
er (K).
er (K).
Prepare a replace the toner cartridge
(K).
(K).
Messages
/ Second messages
Description
Solution