Gestetner c7528 补充手册
Paper and Other Media
21
B
Load paper into the tray with the print side down.
❒ Check that the top of the stack is not higher than the limit mark inside the
tray.
C
Carefully slide the paper tray into the printer, until it stops.
Loading Paper in Tray 2 and Paper Feed Unit Type 7300
Paper of different sizes can be loaded in tray 2 and the 500- and 1000-sheet pa-
per feed units (optional) by adjusting the positions of the side and end guides.
per feed units (optional) by adjusting the positions of the side and end guides.
This section describes loading paper in tray 2.
❒ If the side and end guides are in the right positions for the paper to be loaded,
they do not have to be adjusted.
A
Slowly slide the paper tray out, until it stops.
B
Adjust the side guide according to the size and orientation of the paper
as follows:
as follows: