Gestetner c7528 补充手册
Paper and Other Media
32
B
Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter}key.
Enter}key.
The paper selection menu appears.
C
Check [Bypass Size] appears, and then press the {# Enter} key.
The paper size selection menu appears.
D
Press the {U} or {T} key to display [Custom Size], and then press the {#
Enter} key.
Enter} key.
E
Press the {U} or {T} key to set the horizontal value, and then press the
{# Enter} key.
{# Enter} key.
By pressing the key, the value increases or decreases by 0.01 inch. By press-
ing and holding the key, the value varies by 1 inch.
ing and holding the key, the value varies by 1 inch.
F
Press the {U} or {T} key to set the vertical value, and then press the {#
Enter} key.
Enter} key.
After about two seconds, the display returns to the menu.
G
Press the {Online} key.
The initial screen appears.
Specifying a paper type for the Bypass Tray
By selecting the paper type you want to load, the printer performs better. You can
select from the following paper types:
select from the following paper types:
• Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead, Pre-
printed Paper, OHP Transparencies, Thick Paper, Plain Paper (Duplex),
Thick Paper (Duplex)
Thick Paper (Duplex)
❒ You cannot use the following functions when printing on paper loaded in the
bypass tray:
• Duplex Print
• Job Separation
Menu:
Paper Input
Custom Size:
Horiz. 8.50”
Custom Size:
Vert. 11.00”