Gestetner c7528 安装指南

Configuration

126

N

Press the {U} or {T} key to display [DHCP], and then press the {# Enter}
key.

O

Press the {U} or {T} key to display [On], and then press the {# Enter} key.

❒ “p” shows the current setting.
❒ After about two seconds, the display returns to the network setup menu.

P

Select one of the items below if necessary.

• Auto Select (Default)

• Ethernet II

• Ethernet 802.2

• Ethernet 802.3

• Ethernet SNAP

❒ Usually, use the default setting (“Auto Select”). When you first select “Auto

Select”, the frame type detected by the printer is adopted. If your network
can use more than two frame types, the printer may fail to select the correct
frame type if “Auto Select” is selected. In this case, select the appropriate
frame type.

Q

Press the {U} or {T} key to display [Frame Type (NW)], and then press the
{# Enter} key.

The current setting appears on the display.

R

Press the {U} or {T} key to display the frame type you want to use, and
then press the {# Enter} key.

  Network Setup:

   DHCP

  DHCP:

  *On

  Network Setup:

   Frame Type (NW)

  Frame Type (NW):

  *Auto Select