Gestetner c7528 操作指南
Monitoring and Configuring the Printer
245
wins
Use the “wins” command to configure WINS server settings.
❖ Viewing settings
msh> wins
• If the IP address obtained from DHCP differs from the WINS IP address,
the DHCP address is the valid address.
❖ Configuration
msh> wins “interface_name” {on | off}
• {on} means “active” and {off} means “inactive”.
• Be sure to specify the interface.
• ip1394 can be specified only when the IEEE 1394 interface is installed.
• wlan can be specified only when the IEEE 802.11b interface is installed.
❖ Address configuration
Use the following command to configure a WINS server IP address:
msh> wins “interface_name” {primary|secondary} “IP ad-
dress”
dress”
• Use the “primary” command to configure a primary WINS server IP ad-
dress.
• Use the “secondary” command to configure a secondary WINS server IP
address.
• Do not use “255.255.255.255” as the IP address.
rate [auto|11m|5.5m|2m|1m]
You can set the IEEE 802.11b transmitting
speed.
speed.
The speed you specify here is the speed at
which data is sent. You can receive data at
any speed.
which data is sent. You can receive data at
any speed.
auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m: 2 Mbps fixed
1m: 1 Mbps fixed
Interface name
Interface configured
ether
Ethernet interface
ip1394
IEEE 1394 interface
wlan
IEEE 802.11b interface
Parameter
Value configured