Gestetner c7528 操作指南
Monitoring and Configuring the Printer
266
phy release file open failed.
Replacing the network interface board is re-
quired. Contact your sales or service repre-
sentative.
quired. Contact your sales or service repre-
sentative.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
serviced by printer 0, <print server name>
(In the print server mode) The print queue can-
not be established. Make sure that print queue
exists on the specified file server.
not be established. Make sure that print queue
exists on the specified file server.
Print server <print server name>has no printer. (In the print server mode) The printer is not as-
signed to the print server. Using NWadmin, as-
sign the printer, and then restart it.
sign the printer, and then restart it.
print sessions full
No more print jobs can be accepted.
Printer <printer name> has no queue
(In the print server mode) The print queue is
not assigned to the printer. Using NWadmin,
assign the print queue to the printer, and then
restart it.
not assigned to the printer. Using NWadmin,
assign the print queue to the printer, and then
restart it.
pserver start. (NetWare)
(In the print server mode) The NetWare ser-
vice has started.
vice has started.
Required file server (<file server name>) not
found
found
The required file server is not found.
restarted.
The lpd service has started.
sap enable, saptype=<SAP type>, sap-
name=<SAP name>
name=<SAP name>
The SAP function has started. The SAP packet
is issued to advertise the service on the SAP
table on the NetWare server.
is issued to advertise the service on the SAP
table on the NetWare server.
session <community name> already defined.
The requested community name is not de-
fined.
fined.
session_ipx <community name> not defined.
The requested community name is not de-
fined.
fined.
Set context to <NDS context name>
An NDS context name has been set.
shutdown signal received. network service re-
booting...
booting...
The network service is rebooting.
smbd started. (NetBIOS)
smbd (Aerver Message Block Daemon) has
started.
started.
SMTPC: failed to get smtp server ip-address.
The SMTP server IP address could not be ob-
tained. This could be because:
tained. This could be because:
•
The specified DNS server could not be
found.
found.
•
No connection to the network has been es-
tablished.
tablished.
•
The specified DNS server could not be
found.
found.
•
An incorrect DNS server is specified.
•
The specified SMTP server IP address
could not be found in the DNS server.
could not be found in the DNS server.
Message
Problem and solutions