Gestetner c7528 操作指南

Using a Printer Server

279

• NDS Tree: To enable the NDS mode, enter the name of the NDS tree you

want to log on to. Use up to 32 single byte alphanumeric characters.

• NDS Context Name: To enable the NDS mode, enter the print server con-

text. Use up to 127 single byte characters.

• Operation mode: Specify whether to use the interface board as a print serv-

er or a remote printer.

• Remote printer number: This item is effective if you have selected to use

the interface board as a remote printer. Enter the same number as the
number of the printer to be created on the print server. Use 0 to 254 single
byte characters.

• Job Timeout: When the interface board is running as a NetWare remote

printer, the printer cannot judge when a print job ends. Therefore, the print-
er terminates printing when a certain period of time has elapsed since it re-
ceived print data (i.e., when it has not received print data for a certain
period of time). Specify this period of time (3 to 255 seconds). Use single
byte characters. The default value is 15 (seconds).

• Frame Type: Select the frame type from the drop-down menu.

• Print Server Protocol: Select the protocol for NetWare from the drop-down

menu.

• NCP Distribution Protocol: Select the protocol for NCP distribution.

G

Configuration is now complete. Wait for several minutes if you want to restart
Web Image Monitor.

Setting up using PCONSOLE

A

B

When using the existing print queue, go to the procedure for creating a printer.

C

From the [Available Options] menu, select [Print Queue Information], and then
press the {Enter} key.

D

Press {Insert} key, and then enter a print queue name.

E

Press {Esc} key to return to the [Available Options] menu.

F

G

On the [Available Options] menu, click [Print Server Information], and then
press the {Enter} key.