Gestetner c7528 操作指南

下载
页码 341
Making Printer Settings Using the Control Panel
170
• 600dpi Thin Ppr
• 600dpi Norm. Ppr
• 1200dpi
❒ Default: 600dpi Thin Ppr
❖ Replacmnt Alert
Use this function to specify when to warn the user about replacing supplies. 
• Notify Sooner
• Normal
• Notify  Later
❒ Default: Normal
❖ Date/Time
Use this to set the date and time.
❖ WL.LAN Signal
You can check the signal strength when using wireless LAN. The menu ap-
pears when the 802.11b interface unit is installed.
❖ WL.LAN Defaults
Reset the wireless LAN to default. The menu appears when the 802.11b in-
terface unit is installed.
❖ Key Repeat
The default setting [On] enables the user to scroll through menu items and
settings by holding the key down; the [Off] setting requires the user to press
the key for each Cursor/Scroll movement.
❖ Erase All Mem.
Use this menu item to erase all data stored in the hard disk drive and and
RAM. Erasing all data takes some time, but use this function to prevent infor-
mation leakage when disposing the machine.