Gestetner c7528 操作指南
Monitoring and Configuring the Printer
222
port 9100
timeout=300(sec)
bidirect on
conn multi
apl async
timeout=300(sec)
bidirect on
conn multi
apl async
• The “port” specifies the port number of the direct printing port.
• The “bidirect” setting indicates whether the direct printing port is bidirec-
tional or not.
❖ Setting timeout
msh> diprint timeout [30~65535]
• You can specify the timeout interval to use when the printer is expecting
data from the network.
• The default is 300 seconds.
❖ Setting bidirect
msh> diprint bidirect {on | off}
• You can specify whether the direct printing port is bidirectional or not.
❖ Specifying the number of concurrent connections
msh> diprint conn [multi | single]
The above command specifies the number of concurrent diprint connections.
Specify “multi” for multiple connections or “single” for a single connection.
The above command specifies the number of concurrent diprint connections.
Specify “multi” for multiple connections or “single” for a single connection.
❖ Specifying synchronization
msh> diprint apl [async | sync]
The above command specifies whether to synchronize disconnection and ap-
plication termination. Specify “sync” if you want to perform synchronization, or
“async” otherwise.
The above command specifies whether to synchronize disconnection and ap-
plication termination. Specify “sync” if you want to perform synchronization, or
“async” otherwise.
dns
Use the “dns” command to configure or display DNS (Domain Name System)
settings.
settings.
❖ View settings
The following command displays current DNS settings:
msh> dns
❖ DNS server configuration
The following command enables or disables the DNS server address:
msh> dns “number” server “server address”
The following command displays a configuration using the IP address
192.168.15.16 on a DNS 1 server:
The following command displays a configuration using the IP address
192.168.15.16 on a DNS 1 server: