Gestetner c7528 操作指南
Monitoring and Configuring the Printer
225
help
Use the “help” command to display the available command list and the proce-
dures for using those commands.
dures for using those commands.
❖ Command list display
msh> help
❖ Display of procedure for using commands
msh> help “command_name”
hostname
Use the “hostname” command to change the printer name.
❖ View settings
msh> hostname
❖ Configuration
msh> hostname “interface_name” “printer_name”
• Enter the printer name using up to 63 alphanumeric characters.
• You cannot use a printer name starting with “RNP” or “rnp”.
• The Ethernet interface and IEEE 802.11b interface will have the same
printer name.
• ip1394 can be specified only when the IEEE 1394 interface is installed.
• wlan can be specified only when the IEEE 802.11b interface is installed.
❖ Initializing the printer name for each interface
msh>hostname “interface_name” clear name
ifconfig
Use the “ifconfig” command to configure TCP/IP (IP address, subnet mask,
broadcast address, default gateway address) for the printer.
broadcast address, default gateway address) for the printer.
❖ View settings
msh> ifconfig
Interface name
Interface configured
ether
Ethernet interface
ip1394
IEEE 1394 interface
wlan
IEEE 802.11b interface