Gestetner c7528 操作指南
Using a Printer Server
282
• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want
to log on to. Use up to 32 single byte alphanumeric characters.
• NDS Context Name: To enable NDS mode, enter the print server context.
Use up to 127 single byte characters.
• Operation mode: Specify whether to use the interface board as a print serv-
er or a remote printer.
• Remote printer number: This item is effective if you have selected to use
the interface board be used as a remote printer. Enter the same number as
the number of the printer to be created on the print server. Use 0 to 254
single byte characters.
the number of the printer to be created on the print server. Use 0 to 254
single byte characters.
• Job Timeout: When the interface board is running as a NetWare remote
printer, the printer cannot judge when a print job ends. Therefore, the print-
er terminates printing when a certain period of time has elapsed since it re-
ceived print data (i.e., when it has not received print data for a certain
period of time). Specify this period of time (3 to 255 seconds). Use single
byte characters. The default value is 15 (seconds).
er terminates printing when a certain period of time has elapsed since it re-
ceived print data (i.e., when it has not received print data for a certain
period of time). Specify this period of time (3 to 255 seconds). Use single
byte characters. The default value is 15 (seconds).
• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down
menu.
• NCP Distribution Protocol: Select the protocol for NCP distribution.
G
Confirm the settings, and then click [Apply].
Configuration is now complete. Wait for several minutes if you want to restart
Web Image Monitor.
Web Image Monitor.
Setting up using NWadmin
A
From Windows, start NWadmin.
For details about NWadmin, see the NetWare manuals.
B
Set up the network connection to a print queue. Select the object in
which the print queue is located in the directory tree, and then click [Cre-
ate] on the [Object] menu.
which the print queue is located in the directory tree, and then click [Cre-
ate] on the [Object] menu.
C
In the [Class of new object] box, click [Print Queue], and then click [OK].
D
In the [Print Queue Name] box, enter the name of the print queue.
E
In the [Print Queue Volume] box, click [Browse].
F
In the [Available objects] box, click the volume in which the print queue is
created, and then click [OK].
created, and then click [OK].
G
Check the settings, and then click [Create].