Gestetner dsm725e 操作指南

Copy Paper

55

*1

Set the paper size selector to the p mark, and then select the paper size in System

Settings. See “Tray Paper Settings”, General Settings Guide.

*2

Set the paper size selector to the p mark, and then specify the paper size. See “Copy-

ing from Paper Tray 2”, Copy/Document Server Reference.

*3

Place the paper in the bypass tray, and select the paper size. See “When Copying onto

Regular Size Paper”, Copy/Document Server Reference.

*4

Place the paper in the bypass tray, and specify the paper size. See “When Copying

onto Custom Size Paper”, Copy/Document Server Reference.
When paper larger than 433 mm is used, it is likely to jam, crease or not feed in prop-

erly. Make sure the paper is placed correctly so that it feeds in straight.

*5

Placing one sheet at a time is recommended.

*6

The paper tray guide is fixed. If you want to change the size of paper placed in this

tray, contact your service representative.

*7

When loading paper, make sure the stack height does not exceed the lower limit

mark of the paper tray 2. See “Setting special paper in the paper tray 2”, Trouble-

shooting.

*8

When the paper size is larger than A4L, you can load 10 sheets.
When the paper size is smaller than A4L, you can load 100 sheets.

*9

When the thick paper size is larger than A4L, you can load 10 sheets. When the thick

paper size is smaller than A4L, you can load 40 sheets.

*10

When loading copy paper, make sure the stack height does not exceed the limit mark.

The maximum number of sheets you can load at a time depends on the paper thick-

ness and condition.

*11

If you want to copy onto thick (105 g/m

2

, 28 lb or heavier) paper, select Thick Paper

mode. See “Copying from Paper Tray 2”, Copy/Document Server Reference.

*12

Paper size up to 600 mm (23.6") is available when the optional HDD is installed.

(op-
tion-
al)

60-90 g/m

2

 

(16-24lb.)

A4K, 8

1

/

2

" × 11"K 

2000 
(1000 + 
1000) 
sheets