Gestetner f540 操作指南
Key Operator Settings
152
7
Programming Outside Access
Number
Number
A Press 0
0
0
0 or 1
1
1
1 to select "4. Out-
side Access Number”.
Note
❒ The code for each function
that appears on the display
varies depending on the in-
stalled options or functions
settings.
varies depending on the in-
stalled options or functions
settings.
B Press the {{{{OK}}}} key.
C Enter the Outside Access Num-
C Enter the Outside Access Num-
ber (1 or 2–digits) with the
number keys.
number keys.
D Press the {{{{OK}}}} key.
KKKK
Press the
{{{{User Tools}}}} key.
The standby display reappears.
Transfer Report
This section describes the procedure
for registering the fax number of the
line your machine is connected to as
the return address for Transfer Re-
quests.
When you make a Transfer Request
from this machine, the registered
number is sent to the Transfer Station.
The Transfer Station then sends back
the Transfer Result Report to this fax
number.
You can register a G3 Direct Number
(return address) for each telephone
line your machine is connected to, as
described below.
for registering the fax number of the
line your machine is connected to as
the return address for Transfer Re-
quests.
When you make a Transfer Request
from this machine, the registered
number is sent to the Transfer Station.
The Transfer Station then sends back
the Transfer Result Report to this fax
number.
You can register a G3 Direct Number
(return address) for each telephone
line your machine is connected to, as
described below.
• G3 Direct Number
The G3 Direct Number is usually
registered with the International
Access Code such as "011," country
code, area code (minus the leading
zero), "-" (a pause), and the fax
number in that order. You can use
up to 16 digits.
Example: If your country code is 1,
area code is 222, and fax number is
123–4567, register the G3 Direct
number as "0111222–1234567."
registered with the International
Access Code such as "011," country
code, area code (minus the leading
zero), "-" (a pause), and the fax
number in that order. You can use
up to 16 digits.
Example: If your country code is 1,
area code is 222, and fax number is
123–4567, register the G3 Direct
number as "0111222–1234567."
Note
❒ The Transfer Request function will
not be activated unless the return
address is registered. See p.20
“Transfer Request”.
address is registered. See p.20
“Transfer Request”.
AAAA
Press the
{{{{User Tools}}}} key.
BBBB
Press
0
0
0
0 or 1
1
1
1 until "2. Fax Fea-
tures" is displayed.
CCCC
Press the
{{{{OK}}}} key.
DDDD
Press
0
0
0
0 or 1
1
1
1 until "4. Key Op.
Tools" is displayed.
EEEE
Press the
{{{{OK}}}} key.
FFFF
Press
{{{{2}}}}{{{{2}}}}{{{{2}}}}{{{{2}}}}.
GGGG
Press the
{{{{OK}}}} key.
StellaF25_EN_Combine_F_pre_FM.book Page 152 Thursday, August 26, 2004 8:45 PM