Gestetner f540 补充手册

Registering Addresses for IP-Faxing

143

If the Network Transmission Auto 
Check Function Is Turned Off

If the Network Transmission Auto
Check function is set to "Off" with
user parameters, select IP-Fax
Transmission in the display that
appears. For information about
changing this setting, see p.166
“User Parameters” (switch 32, bit
1).
A Press the 0

0

0

0 or 1

1

1

1 key to select

B Press the {{{{OK}}}} key.

HHHH

Using IP Address or Host Name

A Enter the IP address or host

name you want to register.
If the Network Transmission
Auto Check function is set to
"On":

If the Network Transmission
Auto Check function is set to
"On":

❒ IP addresses and host names

can contain up to 127 charac-
ters.

❒ When specifying a destina-

tion using IP address, you
may need to give the port
number too, depending on
network settings at the re-
ceiving end. For example, if
the destination IP address is
192.168.1.100 and the port
number is 2100, you should
identify the destination as
192.168.1.100:2100. Contact
your network administrator
for details.

❒ When specifying a destination

using host name, you may
need to give the port number
too, depending on network
settings at the receiving end.
For example, if the destination
host name is "abc.compa-
ny.com" and the port number
is 2100, you should identify
the destination as "abc.com-
pany.com:2100". Contact your
network administrator for de-
tails.

❒ When specifying a destina-

tion using host name, set the
DNS Server Address before-
hand.

B Press the {{{{OK}}}} key.
C Press the 0

0

0

0 or 1

1

1

1 key to select

❒ If the Network Transmission

A u t o   C h e c k   f u n c t i o n   i s
turned off, the display does
not appear. Proceed to step

ters” (switch 32, bit 1).