Lanzar sd34mip 用户手册

Before You Start

AM Tuner Section

CD Player Section

522-1620(KHz)
(Europe/Russia)

530-1710 (KHz)
(U.S.A.)

450KHz

35dBuV

VCD Signal System

PAL/NTSC

60dB

55dB(1KHz)

0.1%

General

FM Tuner Section

87.5-108(MHz)
(Europe)

87.5-107.9(MHz)
(U.S.A.)

10.7MHz

10dBuV

60dB

30dB

1KHz

30-15000Hz

Note:

Due to continuous product improvement,

specifications and design are subject to

change without prior notice.

Specifications

Power Requirement

14.4V DC
(11-16V allowable)

Load Impedance

10dB

Bass 100Hz

Treble 10KHz

Tone Controls

Approx.192 x 178 x50
mm (d/w/h)

Dimensions

Approx.1.75kg

Weight

Mounting
Dimensions

Approx.169 X 182X53
mm (d/w/h)

Tuning Range

IF Range

Usable Sensitivity
(-30dB)

Signal-to-noise Ratio

Stereo Separation

Frequency Response

Frequency Range

IF Range

Usable Sensitivity
(-20dB)

Signal-to-noise Ratio

Separation

Distortion

DVD Player Section

Number of channel

5Hz to 20,000Hz

98dB

60dB

Frequency Response

Dynamic Range

Signal-to-Noise Ratio

2 channels

Less than
measurable limit

Wow and Flutter

65-74(MHz)

Russia)

Max.Power Output

80W X 4

(Optional )

VCD/CD/MP3/MPEG-4/USB/SD

Number Buttons

During playback, you any

track

directly by

( 0~9).

The selected track will be played automati-
cally.

can select

using Number Buttons

* This function is operated by using remote
control only.

Note:

MO/ST Selector

During VCD playing, repeatedly press
AUDIO

button to select the mode as bellow:

This function is operated by using the remote
control.

Mono left

Mono right

Stereo

Note:

Program Playing

During VCD/CD mode, press PROG, the
TFT displays the program menu. Pressing
NUMBER BUTTONS to select the track
Number and then press to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
the cursor to and press ENTER to the
previous page; move the cursor to and
press ENTER to the next page.
During this process, press or PROG
to cancel the program playing.

The function is only valid on remote control.

Note:

Playing PBC (Menu)

During VCD status, first pressing

TITLE

PBC playback starts and the menu of entire
disc appears on the monitor. And then you
can select your favorite track by using

Number Buttons

. When a track is playing,

you can

button to return to

if you would like to end the track

and select others. To cancel PBC playing,
press

button again.

press MENU

the menu

TITLE

This function is operated by using the remote
control.

Note:

PBC playing confirms to version 2.0 of SVCD/
VCD disc only.

* This function is operated by using remote
control only.

Note:

During CD playback, first press GOTO,
and TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons. Secondly press GOTO button,
track go to:--:-- appears on TFT, also input
your desired numbers to play the current
time of your selection.

Setting the Playback Time

During VCD mode, press GOTO button
to set the playing time, when the TFT dis-
play :

. Press [ ][ ] to select the options,

press ENTER to set the status.Then press
NUMBER BUTTONS or [ ][ ] to set
the current status.

track/disc time/track time/repeat/time

disp

During MP3/USB/SD mode, press GOTO
first to display : ---/all track, input the
numbers to play the desired track. Press
second :

to adjust the playing time.

--:--

During MPEG-4 mode, press GOTO first
to display : select:---, input the numbers to
play the desired track. Press

seco-

ndly :

to adjust the playing time.

GOTO

time-:--:--