ONKYO ht-sr750 用户指南
53
Advanced Setup
This section explains how to check the speaker settings
and how to set them manually, which is useful if you
change a speaker after performing the automatic speaker
setup.
Some speaker settings are set automatically by the Auto-
matic Speaker Setup function (see page 36).
and how to set them manually, which is useful if you
change a speaker after performing the automatic speaker
setup.
Some speaker settings are set automatically by the Auto-
matic Speaker Setup function (see page 36).
By default, the Speaker Configuration and Crossover
Frequency settings are already configured for use
with the speakers included in this home theater sys-
tem, so you only need to change them if you use dif-
ferent speakers.
Frequency settings are already configured for use
with the speakers included in this home theater sys-
tem, so you only need to change them if you use dif-
ferent speakers.
Speaker Configuration
If you’re using speakers other than those included with
this home theater system, use these settings to specify
which speakers are connected and their sizes.
this home theater system, use these settings to specify
which speakers are connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
larger than 6-1/2 inches (16 cm),
specify
Large
(full band)
.
For those
with a smaller diameter, specify
Small
(default crossover 100 Hz)
.
The crossover frequency can be
changed on page 54.
changed on page 54.
Note:
• These settings cannot be changed while headphones
are connected, or the multichannel DVD input is being
used.
used.
Advanced Speaker Settings
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
2
Use the Up and Down [
]/[
]
buttons to select “Sp Config,”
and then press the [ENTER] but-
ton.
and then press the [ENTER] but-
ton.
3
While the Subwoofer setting is
selected, use the Left and Right
[
selected, use the Left and Right
[
]/[
] buttons to select
Yes
or
No
.
Yes:
Select if a subwoofer is con-
nected.
nected.
No:
Select if no subwoofer is con-
nected.
nected.
These settings are set automatically by the Automatic
Speaker Setup function (see page 36).
Speaker Setup function (see page 36).
Cone diameter
RECEIVER
SETUP
4
Use the Down [
] button to
select “Front,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
or
Large
.
Small:
Select if the front speakers are
small.
small.
Large:
Select if the front speakers are
large.
large.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
and does not appear.
5
Use the Down [
] button to
select “Center,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
,
Large
, or
None
.
Small:
Select if the center speaker is
small.
small.
Large:
Select if the center speaker is
large.
large.
None:
Select if no center speaker is
connected.
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
selected.
6
Use the Down [
] button to
select “Surround,” and then use
the Left and Right [
the Left and Right [
]/[
] but-
tons to select
Small
,
Large
, or
None
.
Small:
Select if the surround speak-
ers are small.
ers are small.
Large:
Select if the surround speak-
ers are large.
ers are large.
None:
Select if no surround speakers
are connected.
are connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
selected.
Continue with step 7 of the “Crossover
Frequency” setting on the next page.
Frequency” setting on the next page.
HT-SR750_En.book Page 53 Thursday, August 2, 2007 10:05 AM