Lexmark Optra T 安装指导
Configure Network Printer
27
Point-to-point printing (LexIP)
You can print from any Windows 95, Windows 98 or Windows NT workstation
directly to a Lexmark printer located anywhere on the IP network. No server is
required.
directly to a Lexmark printer located anywhere on the IP network. No server is
required.
1
Install the TCP/IP software component on the workstation. Look on the
Drivers, MarkVision and Utilities CD for the software. (Hint: Do a custom
install to add network support, and select TCP/IP.)
Drivers, MarkVision and Utilities CD for the software. (Hint: Do a custom
install to add network support, and select TCP/IP.)
2
Create a printer object on the workstation:
a
Click Start, Settings, Printers, Add Printer.
b
Windows 95/98: When prompted, select Local Printer (not Network).
This gives you access to the Lexmark Network Printer Monitor later.
This gives you access to the Lexmark Network Printer Monitor later.
Windows NT: When prompted, select My Computer (not Network
printer server). This gives you access to the Lexmark Network Printer
Monitor later.
printer server). This gives you access to the Lexmark Network Printer
Monitor later.
c
Select the correct printer driver.
Note: You can obtain the latest Lexmark printer drivers from our web site
located at: www.lexmark.com.
d
Select any port (LPT, COM, or FILE) for the initial setup. Later, you will
change the port to a logical port.
change the port to a logical port.
e
Click Next, and then continue following the instructions on the screen
until the printer object has been created.
until the printer object has been created.
3
Associate the printer object with the physical printer.
a
Select the newly created printer object in the printers folder.
b
Windows 95/98: Click File, Properties, Details, Add Port.
Windows NT: Click File, Properties, Ports, Add Port.
c
Click Other, Lexmark Network Printer Monitor, then click OK. A list of
available printers is shown. If your printer does not appear in the list,
click Add Adapter, and then follow the instructions on the screen until it
does appear.
available printers is shown. If your printer does not appear in the list,
click Add Adapter, and then follow the instructions on the screen until it
does appear.
d
Find the IP address of your printer in the list, and then select it.
e
Specify a logical port name to associate with the printer, and then click
OK.
OK.
Note: If you assign a logical port name of LPT1, LPT2, LPT3 or LPT4, you
can print from DOS using LexIP. For example:
c:\>copy FileName LPT3
c:\>copy FileName LPT3
f
Verify that the logical port name you assigned to the printer now shows
in the box labeled Print to the following port.
in the box labeled Print to the following port.
g
Click OK.