Lexmark Optra T 用户指南
153
Removing Options
Removing an option card
for instructions on accessing the
printer system board.
W
ARNING
:
Electronic components are easily
damaged by static electricity. Touch something
metal before you touch the card.
metal before you touch the card.
1
Locate the option you want to remove.
2
Loosen and remove the two screws over and under the slot.
Gently pull the card out of the connector on the system board.
Gently pull the card out of the connector on the system board.
3
Place the option card in its original packaging. If you did not
save the packaging, wrap the card in paper and store it in a box.
save the packaging, wrap the card in paper and store it in a box.
4
If you need to install another option on the system board, refer
to the
to the
5
Refer to the
system board.