Samsung dvd-p750 用户指南

ENG-9

S

E T U P

5.1CH ANALOG AUDIO OUT JACKS
- Connect to an amplifier with 5.1ch analog input jacks.

DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect

to a compatible Dolby Digital receiver.

- Use either an optical or coaxial digital cable to connect

to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.

AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.

VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on

your television.

- The Video Output in Setup Menu must be set to

Component (I-SCAN) or COMPOSITE/S-VIDEO.

S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the 

S-Video jack on your television for higher picture
quality.

- The Video Output in Setup Menu must be set to 

COMPOSITE/S-VIDEO.

COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component

Video in jacks. These jacks provide P

R

, P

B

and Y video. 

- If Component (P-SCAN) Video Output is selected in

Setup Menu, progressive scan mode will work.

- If Component (I-SCAN) Video Output is selected in

Setup Menu, interlaced scan mode will work.

SCART JACK
- Connect to a TV scart input jack. 

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN). 

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.

- If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.

- There may be no image output if the DVD player is connected to a TV or display that is not compatible with

the above format.

- See pages 64 ~ 65 to get more information on how to use the setup menu.

00635A-P750-XEU-1  5/18/05  3:54 PM  Page 9