Samsung dvd-v5500 用户手册

30 - English

You can copy a cassette to your DVD-VCR from another
video source, such as another VCR or a Camcorder etc.

• It is an infringement of copyright laws to copy 

prerecorded cassettes or to re-record them in any 
form without the permission of the owners of the 
corresponding copyright.

Connect the output jack of your External
devices to the LINE IN 1 or LINE IN 2 on the
front or rear of the DVD-VCR.

Insert a blank cassette in your DVD-VCR.

Insert the pre-recorded cassette in the other video
source (VCR or Camcorder etc).

Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR:

• LINE IN 1, LINE IN 2 for the audio/video input

Start playing back the cassette to be copied.

Hold down the REC (

●) button for a while to start

recording on your DVD-VCR.

When you have finished recording, press the 
■ button on both VCR and DVD-VCR.

• If you wish to view the cassette being copied, your

DVD-VCR must be connected as usual to the
television (refer to page 14 for further details).

This function allows you to start a new recording at a
specific position on the cassette while
maintaining a very smooth scene change.

Insert the cassette to be edited in your  DVD-VCR.

Press the √

ll button to start playback.

When you reach the position from which you wish
to start the new recording, press the √

ll button.

Press the F.ADV/STEP button as often as 
necessary to advance frame by frame, until the
exact recording position is located.

While the DVD-VCR is in still mode, hold down the
REC (

●) button for a while to activate the

assemble edit function.

Select the source from which you wish to record
by pressing:
• The PROG (

or ) button 

for 

television 

channels

• The INPUT SEL. button for the LINE IN 1, 

LINE IN 2 input source.

Press the √

ll button to start recording.

When you have finished recording, press the 
■ button.

00646T V6500/XFA-eng1  3/15/05  3:40 PM  Page 30