Samsung cht-500 说明手册
68
GB
About Speaker Setup
To Set the Speaker Balance
1
Press the SPEAKER button.
Each time you press the button, the selection will change as
follows: FL
Each time you press the button, the selection will change as
follows: FL
Æ
C
Æ
FR
Æ
SR
Æ
SL
Æ
SU
Æ
VOL.
2
Press AMP VOL + and AMP VOL - buttons to adjust the speaker
volume.
The volume can be adjusted to a level between –10 and +10.
volume.
The volume can be adjusted to a level between –10 and +10.
To Test the Speakers
1
In Stop mode, press the TEST button.
◆
The test tone will be output to the speakers in the following
order: FL (Front Speaker/L)
order: FL (Front Speaker/L)
Æ
C (Center Speaker)
Æ
FR (Front
Speaker/R)
Æ
SR (Surround Speaker/R)
Æ
SL (Surround
Speaker/L)
Æ
SU (Subwoofer).
◆
A hissing sound from a speaker indicates that the speaker is
installed correctly.
installed correctly.
2
To end the speaker test, press the TEST button again.
➢
• While the test tone is being produced, you can use the VOL
buttons to set the speaker balance for the selected channel.
• While the subwoofer is being tested, a low bass sound of
100Hz or 125Hz will be heard.
To Set the Bass/Treble
1
Press the BASS or TREBLE button.
Each time you press the BASS or TREBLE button, the
corresponding setting will turn on or off.
Each time you press the BASS or TREBLE button, the
corresponding setting will turn on or off.
2
Use AMP VOL + and AMP VOL - buttons to adjust the bass or
treble of the speakers.
The bass or treble can be adjusted to a level between –10 and
+10.
treble of the speakers.
The bass or treble can be adjusted to a level between –10 and
+10.
1
1,2
1
1
2
2
2
2
FL
FRONT SPEAKER
LEFT
FRONT SPEAKER
RIGHT
CENTER SPEAKER
SURROUND SPEAKER
RIGHT
SURROUND SPEAKER
LEFT
SUB WOOFER
SPEAKER
C
SUB
WOOFER
FR
SR
SL
00404A CHT-500/XST-GB4 7/5/04 6:40 PM Page 68