Samsung s23a950 用户指南
56
Setup and Reset
7
7 Setup and Reset
Configuring Backlight
1
Press [
] on the product.
2
Press [
] to move to
SETUP&RESET
and press [
] on the product.
3
Press [
] to move to
ECO
and press [
] on the product.
4
Press [
] to move to
Backlight
and press [
] on the product. The following screen will appear.
Off
: Turn off the screen and activate DPMS mode. If
Off
is selected, it takes several seconds
for the monitor to detect movement and turn on after it turned off.
Dimming
: Reduce the brightness of the screen (still turned on).
5
Press [
] to move to the option you want and press the [
].
6
The selected option will be applied.
The optimal working area for
Eco Motion Sensor
is within a certain distance (1m) and atcertain
angle (40°).
If there is no user movement, the
Eco Motion Sensor
may fail to detect motion.
If you think that the mode entry message appears too frequently, increase the time setting of the
Eco Motion Sensor
or turn the
Eco Icon Display
Off
.
Avoid using radio equipment such as a walkie-talkie near the product as this may cause a product
malfuction.
7.1.2
Eco Light Sensor
The Eco Saving feature optimizes the view condition and contributes to power saving by adjusting the
screen brightness depending on the ambient light intensity.
This menu is not available when
Bright
is in
Dynamic Contrast
mode.
This menu is not available when
Eco Saving
is enabled.
Configuring the Eco Light Sensor
1
Press [
] on the product.
2
Press [
] to move to
SETUP&RESET
and press [
] on the product.
3
Press [
] to move to
ECO
and press [
] on the product.
m
Return
Enter
Move
ECO
Eco Motion Sensor
Backlight
Eco Light Sensor
Sensitivity
Brightness Level
Eco Saving
Eco Icon Display
ଥࢿ
5 Min
Off
Off
Off
Dimming
Dimming
m