Samsung 150n 151n 152n 153t 170n 171n 172n 173n 173t 174t 191n {191t plus} 192n 193n 193t 用户指南

Check List

Q & A

Self-Test 
Feature Check

 

Your monitor provides a self test feature that allows you to check whether your monitor is 
functioning properly. 

1. Turn off both your computer and the monitor.  

 

2. Unplug the video cable from the back of the computer. 

 

3. Turn on the monitor.  

If the monitor is functioning properly, you will see a box with a border and text inside as 
shown in the following illustration: 
The three boxes inside the border are red, green and blue. 

 

Failure of any of the boxes to appear indicates a problem with your monitor. This box 
also appears during normal operation if the video cable becomes disconnected or 
damaged. 

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the 

monitor. 

If your monitor screen remains blank after using the previous procedure, check your 
video controller and computer system; your monitor is functioning properly.  

If there is something wrong with the input signal, a message appears on the screen or 
the screen goes blank although the power indicator LED is still on. The message may 
indicate that the monitor is out of scan range or that you need to check the signal cable. 

 

The location and the position of the monitor may influence the quality and other 
features of the monitor.  
 

1. If there are any woofer speakers near the monitor, unplug and relocate the woofer to another 

room.  
 

2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3