Samsung 510n 512n 515v 710n 710t 711t 712n 910n 910t 912n 912t 915v 用户指南
displayed. If the display exceeds
85Hz, the display will work properly
but the "Not Optimum
Mode","Recommanded Mode
1280 x 1024 60Hz" message
appears for one minute and then
disappears.
Please change to the recommended
mode during this one-minute period.
(The message is displayed again if
the system is rebooted.)
85Hz, the display will work properly
but the "Not Optimum
Mode","Recommanded Mode
1280 x 1024 60Hz" message
appears for one minute and then
disappears.
Please change to the recommended
mode during this one-minute period.
(The message is displayed again if
the system is rebooted.)
There is no image on the screen.
Is the power indicator on the
monitor blinking at 1 second
intervals?
Is the power indicator on the
monitor blinking at 1 second
intervals?
The monitor is in PowerSaver mode.
press a key on the keyboard to
activate the monitor and restore the
image on the screen.
If there is still no image, press the
'Source' button.
Then press any key on the keyboard
again to activate the monitor and
restore the image on the screen.
press a key on the keyboard to
activate the monitor and restore the
image on the screen.
If there is still no image, press the
'Source' button.
Then press any key on the keyboard
again to activate the monitor and
restore the image on the screen.
Connected using the DVI cable?
You may get a blank screen if you
boot the system before you connect
the DVI cable, or disconnect and
then reconnect the DVI cable while
the system is running as certain
types of graphic cards do not send
out video signals.
Connect the DVI cable and then
reboot the system.
boot the system before you connect
the DVI cable, or disconnect and
then reconnect the DVI cable while
the system is running as certain
types of graphic cards do not send
out video signals.
Connect the DVI cable and then
reboot the system.
The screen shows
strange colors or just
black and white.
strange colors or just
black and white.
Is the screen displaying only one
color as if looking at the screen
through a cellophane paper?
color as if looking at the screen
through a cellophane paper?
Check the signal cable
connection.Make sure the video
card is fully inserted in it's slot.
connection.Make sure the video
card is fully inserted in it's slot.
Have the screen colors become
strange after running a program or
due to a crash between
applications?
strange after running a program or
due to a crash between
applications?
Reboot the computer.
Has the video card been set
properly?
properly?
Set the video card by referring to the
video card manual.
video card manual.
The screen suddenly
has become
unbalanced.
has become
unbalanced.
Have you changed the video card
or the driver?
or the driver?
Adjust screen image position and
size using the OSD.
size using the OSD.
Have you adjusted the resolution or
frequency to the monitor?
frequency to the monitor?
Adjust the resolution and frequency
at the video card.
(Refer to the
at the video card.
(Refer to the
Preset Timing Modes
).
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
Readjust Position by referring to the OSD.
The screen is out of
focus or OSD cannot
be adjusted.
focus or OSD cannot
be adjusted.
Have you adjusted the resolution or
frequency on the monitor?
frequency on the monitor?
Adjust the resolution and frequency
of the video card.
(Refer to the
of the video card.
(Refer to the
Preset Timing Modes
).
LED is blinking but no
images on the screen.
images on the screen.
Is the frequency properly adjusted
when checking the Display Timing
on the menu?
when checking the Display Timing
on the menu?
Adjust the frequency properly by
referring to the video card manual
and the
referring to the video card manual
and the
Preset Timing Modes
.
(The maximum frequency per
resolution may differ from product to
product.)
resolution may differ from product to
product.)
There are only 16
colors shown on the
screen.
The screen colors
have changed after
colors shown on the
screen.
The screen colors
have changed after
Have the Windows colors been set
properly?
properly?
Windows ME/2000/XP:
Set the colors properly at the
Control Panel → Display →
Settings.
Set the colors properly at the
Control Panel → Display →
Settings.