Polycom EX 软件指南
API Guide for ViewStation EX, ViewStation FX, and VS4000
112
www.polycom.com/videodocumentation
ipaddress
Description
This command sets or gets the LAN IP address of the system. Use this
command when you need to allocate a static IP address to your system. After
a change is made, the system prompts you for a restart.
command when you need to allocate a static IP address to your system. After
a change is made, the system prompts you for a restart.
Note
This setting can only be changed when DHCP is off.
Syntax
ipaddress <set|get> [“ipaddress”]
Example
ipaddress set 192.168.1.111
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > LAN/Intranet > LAN & Intranet:
IP Address
IP Address
Parameter
Definition
set
Sets the LAN IP address when followed by the
“ipaddress” parameter.
“ipaddress” parameter.
To erase the current setting, omit “ipaddress”.
Note: This setting can only be changed when DHCP is
off.
off.
get
Returns the current setting for this option.
“ipaddress”
IP address of the system.