Polycom EX 软件指南
API Guide for ViewStation EX, ViewStation FX, and VS4000
140
www.polycom.com/videodocumentation
numdigitsdid
Description
This command sets or gets the number of digits in the DID gateway number
(E.164 dialing). The number of digits in the DID is that portion of the full DID
that the gateway will be given from the ISDN service provider as the Called
Party Line Identifier. This, in turn, will be passed to the gatekeeper for address
resolution. You are prompted for a restart if you change this option.
(E.164 dialing). The number of digits in the DID is that portion of the full DID
that the gateway will be given from the ISDN service provider as the Called
Party Line Identifier. This, in turn, will be passed to the gatekeeper for address
resolution. You are prompted for a restart if you change this option.
Syntax
numdigitsdid <{0..24}|get>
Example
numdigitsdid 7
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > H.323 > Gateway: Number of
digits in DID Number
digits in DID Number
Note
This option becomes visible when Direct Inward Dial (DID) has been
selected on the same screen.
selected on the same screen.
Parameter
Definition
{0..24}
Specifies the number of digits in the DID gateway
number.
number.
get
Returns the current setting.