Polycom EX 软件指南
System Commands
© Polycom, Inc.
147
pip
Description
This command sets or gets the on-screen PIP mode. The PIP feature allows
the near site to adjust near-camera views while in a video conference.
the near site to adjust near-camera views while in a video conference.
Syntax
pip <on|off|auto|swap|get>
Example
pip auto
User Interface Screen Location
System Info > User Setup: PIP
Parameter
Definition
on
Enables PIP mode. The system shows a PIP window
which remains in the lower right corner of the TV screen
until the video call is completed.
which remains in the lower right corner of the TV screen
until the video call is completed.
off
Disables PIP mode.
auto
The system shows a PIP window when the call is first
connected and when the remote control is not resting
on a flat surface.
connected and when the remote control is not resting
on a flat surface.
swap
Toggles the content of PIP and the main display
between near-site and far-site view.
between near-site and far-site view.
get
Returns the current setting for PIP mode (on, off, or
auto).
auto).