Polycom EX 软件指南
API Guide for ViewStation EX, ViewStation FX, and VS4000
10
www.polycom.com/videodocumentation
adminpassword
Description
This command is used to change the administrator password.
Note
This command cannot be accessed through the RS-232 port.
Syntax
adminpassword <set|get> ["password"]
Examples
adminpassword set MyFXpsswd
adminpassword set "EX 2004"
User Interface Screen Location
System Info > Admin Setup > Security: Admin Password
Parameter
Definition
set
Sets the password used for remote management of the
system if followed by the “password” parameter.
system if followed by the “password” parameter.
To erase the current setting, omit the password
parameter. The system must have an admin password
set before this command works.
parameter. The system must have an admin password
set before this command works.
Note: If you erase the password, you will need to reset
it through the user interface.
it through the user interface.
get
Returns the current admin password.
“password”
Valid characters are: a through z (lower and uppercase),
-, _, @, /, ;, ,, ., \, 0 through 9. The length is limited to 10
characters.
-, _, @, /, ;, ,, ., \, 0 through 9. The length is limited to 10
characters.
Note: If the password string includes spaces, enclose it
in quotation marks.
in quotation marks.