Polycom EX 软件指南
V.35/RS-449/RS-530 Commands
© Polycom, Inc.
263
dsr
Description
This command lets you configure the dsr serial interface control signal (data
set ready). The default setting for this signal is “normal”.
set ready). The default setting for this signal is “normal”.
Syntax
dsr <normal|inverted|get>
Example
dsr get
User Interface Screen Location
System Info > Admin Setup > Video Network > Advanced V.35: DSR
Parameter
Definition
normal
Sets the signal to normal (high voltage is logic 1).
inverted
Sets the signal to inverted (low voltage is logic 1).
get
Returns the current setting (normal or inverted).