Polycom EX 软件指南
System Commands
© Polycom, Inc.
65
dynamicbandwidth
Description
This command is used to specify use of dynamic bandwidth allocation for
Quality of Service. The system’s dynamic bandwidth option automatically
finds the optimum line speed for a call. If you experience excessive packet
loss while in a call with this option enabled, the system decrements the line
speed until there is no packet loss. This is supported only in calls with
endpoints that also support dynamic bandwidth.
Quality of Service. The system’s dynamic bandwidth option automatically
finds the optimum line speed for a call. If you experience excessive packet
loss while in a call with this option enabled, the system decrements the line
speed until there is no packet loss. This is supported only in calls with
endpoints that also support dynamic bandwidth.
Syntax
dynamicbandwidth <yes|no|get>
Example
dynamicbandwidth yes
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > QOS: Dynamic Bandwidth
Parameter
Definition
yes
Enables the dynamic bandwidth option.
no
Disables the dynamic bandwidth option.
get
Returns the current setting (on or off).