Polycom EX 用户指南

System Info>User Setup: Multipoint Mode

mute <near|far|register|unregister>
mute near <on|off|toggle|get>
mute far get
mute register
mute unregister

This command sets the near or far site mute mode. It can also set 
the system to register or unregister mode. In register mode, the 
system sends notification to the RS-232 or Telnet session when the 
far or near site is muted or unmuted.

Sets the command for the near site. It requires one of 
the following parameters: on, off, toggle, or get.

Sets the command for the far site. It requires the 
parameter get.

Registers the system to give notification when the mute 
mode changes.

unregister Disables register mode.

Turns on the mute mode for the near site (mute near).

Turns off the mute mode for the near site (mute near).

If in mute near on mode, switches to the other mode 
setting (mute near off) and vice versa.

Displays the current setting for the near or far site (mute 
near|far get).

mute near on