Dukane 8932 用户指南
19
USING THE PROJECTOR
This section describes how to use and make adjustments to the
projector. It also provides a reference to the keypad and remote
buttons and the options available from the on-screen menus.
projector. It also provides a reference to the keypad and remote
buttons and the options available from the on-screen menus.
Basic Image Adjustment
1
Make sure you have powered up your equipment in the right
order (page 16).
order (page 16).
2
If the image doesn’t display completely, zoom the image
(page 20), adjust the height of the projector (page 20) or center
the image by adjusting its horizontal or vertical position
(page 34). Be sure the projector is at a 90 degree angle to the
screen.
(page 20), adjust the height of the projector (page 20) or center
the image by adjusting its horizontal or vertical position
(page 34). Be sure the projector is at a 90 degree angle to the
screen.
3
If the image is out of focus, rotate the focus lens (page 20).
4
If the image appears to shimmer or if it has blurry vertical
bars after you have adjusted the focus, turn Auto Image
(page 32) off and then back on to reset the automatic sync and
tracking. If that doesn’t clear up the image, turn Auto Image
off and adjust the sync (page 33) and/or the tracking
(page 33) manually.
bars after you have adjusted the focus, turn Auto Image
(page 32) off and then back on to reset the automatic sync and
tracking. If that doesn’t clear up the image, turn Auto Image
off and adjust the sync (page 33) and/or the tracking
(page 33) manually.
5
If the colors don’t look right, adjust the brightness (page 28).