Sony STR-DH710 用户指南

• Use a High Speed HDMI cable. If you use a 

Standard HDMI cable, 1080p or Deep Color 
(Deep Colour) images may not be displayed 
properly.

• Sony recommends that you use an HDMI 

authorized cable or Sony HDMI cable.

• We do not recommend using an HDMI-DVI 

conversion cable. When you connect an 
HDMI-DVI conversion cable to a DVI-D 
component, the sound and/or the image may 
not be output. Connect other audio cords or 
digital connecting cords, then set 

 

“A. ASSIGN” in AUDIO menu (page 81) 
when the sound is not output correctly.

• An audio signal input to the HDMI IN jack 

is output from the SPEAKERS jacks and 
HDMI TV OUT jack. It is not output from 
any other audio jacks.

• Video signals input to the HDMI IN jack can 

only be output from the HDMI TV OUT 
jack. The video input signals cannot be 
output from the VIDEO OUT jacks or 
MONITOR OUT jacks.

• When you want to listen to the sound from 

the TV speaker, set “AUDIO.OUT” to 
“TV+AMP” in the HDMI menu (page 82). If 
you cannot play back multi channel 
software, set to “AMP”. However, the sound 
will not output from the TV speaker.

• Be sure to turn on the receiver when video 

and audio signals of a playback component 
are being output to a TV through this 
receiver. If you set “PASS.THRU” to 
“OFF”, video and audio signals will not be 
transmitted when the power is set to off.

• DSD signals of Super Audio CD are not 

input and output.

• The multi/stereo area audio signals of a 

Super Audio CD are not output.

• Audio signals (sampling frequency, bit 

length, etc.) transmitted from an HDMI jack 
may be suppressed by the connected 
component. Check the setup of the 
connected component if the image is poor or 
the sound does not come out of a component 
connected via the HDMI cable.

• Sound may be interrupted when the 

sampling frequency, the number of channels 
or audio format of audio output signals from 
the playback component is switched.

• When the connected component is not 

compatible with copyright protection 
technology (HDCP), the image and/or the 
sound from the HDMI TV OUT jack may be 
distorted or may not be output.

 

In this case, check the specification of the 
connected component.

• Set the image resolution of the player to 

more than 720p/1080i to enjoy High Bitrate 
Audio (DTS-HD Master Audio, Dolby 
TrueHD).

• The image resolution of player may need 

certain settings be made before you can 
enjoy multi channel Linear PCM. Refer to 
the operating instructions of the player.

• Not every HDMI component supports all 

functions that are defined by the specified 
HDMI version. For example, components 
that support HDMI, version 1.4, may not 
support Audio Return Channel (ARC).

• Refer to the operating instructions of each 

connected component for details.