Infocus LP335 补充手册
Page 2
To extract the USB drivers
Before you install the USB drivers, you need to make the drivers available by 'extracting' them from the .exe file you
downloaded from the InFocus website. Make sure that you extract the files on the computer you want to upgrade.
downloaded from the InFocus website. Make sure that you extract the files on the computer you want to upgrade.
1
Navigate to the location where you stored the USB-drivers.exe file, then double-click it. The example below
shows the file as it appears on the desktop.
shows the file as it appears on the desktop.
2
In the WinZip Self-Extractor dialog box, click Unzip. By default, the files are stored at C:\InFocus USB drivers.
3
Once the files are extracted, click Close.
Now you are ready to install the USB drivers.
To install the USB Drivers for Windows XP
1
Turn on the computer on.
2
Plug the projector into the computer. Make sure the USB cable is plugged into a USB connector on the
computer.
computer.
3
Turn the projector on.
When you turn the projector on, a message appears adjacent to the Windows Task bar, telling you that
Windows has detected new hardware.
Windows has detected new hardware.
Windows XP automatically installs the drivers for the display and the keyboard.
The Found New Hardware Wizard automatically appears.